Replaces the floor flange for your RV toilet. 3" Spigot end slides into your RV's black-water system pipe and adheres with solvent glue, leaving the ring to turn freely and making installation easier.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the LaSalle Bristol RV toilet floor flange. This is going to replace the floor flange on your RV toilet. It's going to allow you to mount a toilet in place. It's really just the connection point between your holding tank, your floor and your toilet.
So, our spigot end here is going to slide into our RV's black water system pipe. Our opening here, is going to allow us to put in a wax ring that we can sit the toilet on to make sure that that's a nice tight seal and nothing's seeping out on the edges there. We've got lots of different holes here that we can use to mount this flange to our four. And then, these two long channels here are for our hardware to mount our toilet onto the flange, those will come up from the bottom and slide in there. That's what you'll screw bolt your toilet down to the floor using.I do want to give you a few measurements to make sure that this is going to work for your set up.
So, our opening diameter of our spigot here is right about three inches. The outer diameter is about three and a half inches. Make sure that that's going to work for you. Our opening here for our wax ring is right about four inches in diameter. And going back to our speaker real fast, just want to give you one extra measurement.
This is going to be right about an inch and a half long, so give you a little bit of room there to reach down into your black water system pipe or to go into that pipe. Just wanted to make sure that you knew all the pertinent information.Our overall diameter there is right at about seven inches, so make sure that this is going to work for your system. I think quality wise it's a very heavy duty plastic, so I wouldn't have any problem putting this on my RV. I think it's going to do a good job for you. Just make sure that all those dimensions that I gave you match up to what you need for your system, and I think you're set.
That is going to complete our look at the LaSalle Bristol RV toilet floor flange. Again, I'm Michael with etrailer.com, thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
Replaces the floor flange for your RV toilet. 3" Spigot end slides into your RV's black-water system pipe and adheres with solvent glue, leaving the ring to turn freely and making installation easier.The part worked great. I love how your video demonstrated the true measurements of the opening. It was very helpful.
Excellent quality. etrailer has all the different types one may need.
Exactly what I ordered
Great selection and service
Parts were exactly what I needed. Thanks!
Fine
Works great, exactly what I needed for remodel.
well made
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.